Table of Contents
Advertisement
English
Operation of this equipment in a residential environment could cause radio interference.
For ambient temperatures above 60° C, this equipment must be installed in a Restricted
Access Location only.
Connect EZ 4i only
Explosion Hazard. Do not disconnect equipment unless power has been switched off or the
area is known to be non-hazardous.
Explosion Hazard – Substitution of components may impair suitability for Class I, Division 2.
The extended temperature plug-in power supply (76002079 / 24000141) that is included
with the EZ04-IAG4-EXT and EZ04-IA00-EXT kits is not certified for C1D2 and must not be
used in C1D2-rated hazardous locations.
914
Digi Connect EZ 4/4i User Guide
Advertisement
Table of Contents
