Table of Contents
Advertisement
Get started with Connect EZ 4/4i
Equipment
CORE module
SIM card
LTE Antenna (2)
Step 2: Connect the power supply
The power supply is included with the device.
Connect EZ 4: Connect EZ 4 is intended to be powered by a locking barrel output transformer
n
rated 100-240 VAC to 12 VDC, and with a 3 A output.
Connect EZ 4i: Connect EZ 4i is intended to be powered by a certified extended temperature
n
power supply pigtail DC cable with output rated at 100-240 VAC to 12 VDC 3 A, -40 C to +74 C.
For more information about the power supplies, see
1. Orient the device so the top of the device is facing you.
2. Connect the twist-lock end of the power supply cord to the device.
3. Plug the other end of the power supply cord to a main power supply.
NEXT STEP: If you are performing the initial device set-up, proceed to the next step:
to site network using an Ethernet
Digi Connect EZ 4/4i User Guide
Description
Note
A SIM card is also required.
An activated SIM card provided by your cellular network operator.
You can insert up to two SIM cards in the CORE module. See
Connect hardware and connect to a cellular
The CORE module supports the standard mini-SIM cards (2FF).
Two LTE antennas are included.
For connection instructions, see
n
the CORE
module.
Digi PN 76002118
n
Step 1: Verify product
LAN.
Step 2: Connect the power supply
network.
Cellular connection: Insert
components.
Step 3: Connect
21
Advertisement
Table of Contents
