Table of Contents
Advertisement
Wi-Fi
o
o
WAN assignment. Once you configure a Wi-Fi client, you must assign the Wi-Fi client to a WAN.
n
See
Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs)
information.
Additional configuration items
Enable and configure background scanning, which allows the Wi-Fi client to move between
n
access points that have the same SSID as their signal strength varies.
Additional access points that client will attempt to use. If connection to one access point fails,
n
the device will attempt to connect to the next access point in the list.
To configure a Wi-Fi client:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Client mode connections.
4. For Add WiFi client:, type the name of the client and click .
The Wi-Fi client configuration window is displayed.
New Wi-Fi clients are enabled by default. To disable, or to enable a client if it has been
disabled, click Enable.
Digi Connect EZ 4/4i User Guide
Identify the username.
Select the SCEP client. See
client
for information about SCEP clients.
Configure a Wi-Fi client and add client networks
Configure a Simple Certificate Enrollment Protocol
for further
250
Advertisement
Table of Contents
