Add An Authentication Group - Digi Connect EZ 4 User Manual

Hide thumbs Also See for Connect EZ 4:
Table of Contents

Advertisement

User authentication
To disable Admin access for the admin group:
l
Shell access:
n
To enable Shell access for the serial group:
l
Shell access is not available if the Allow shell parameter has been disabled. See
Disable shell access
Serial access:
n
To enable Serial access for the admin group:
l
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Add an authentication group

Required configuration items
The access rights to be assigned to users that are assigned to this group.
n
Additional configuration items
Access rights to OpenVPN tunnels, and the tunnels to which they have access.
n
Access rights to captive portals, and the portals to which they have access.
n
Access rights to query the device for Nagios monitoring.
n
To add an authentication group:
  WebUI
Digi Connect EZ 4/4i User Guide
(config)> auth group admin acl admin enable false
(config)>
(config)> auth group serial acl shell enable true
(config)>
for more information about the Allow shell parameter.
(config)> auth group admin acl serial enable true
(config)>
Authentication groups
661

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect ez 4i

Table of Contents