Digi Connect EZ 4 User Manual page 467

Virtual Private Networks (VPN)
The number of probe attempts before the PPP-over-L2TP connection is considered to have
n
failed.
The amount of time that the device should wait for a response to a probe attempt before
n
considering it to have failed.
To configure the Connect EZ device to regularly probe the PPP-over-L2TP connection:

WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > PPP-over-L2TP.
4. Create a new PPP-over-L2TP access concatenator or select an existing one:
To create a new L2TP access concatenator , see
n
To edit an existing L2TP access concatenator , click to expand the appropriate tunnel.
n
5. After creating or selecting the PPP-over-L2TP access concatenator, click Active recovery.
6. Enable active recovery.
7. For Restart interface, enable to configure the device to restart the interface when its
connection is considered to have failed. This is useful for interfaces that may regain
connectivity after restarting, such as a cellular modem.
8. For Reboot device, enable to instruct the device to reboot when the WAN connection is
considered to have failed.
Digi Connect EZ 4/4i User Guide
Configure a PPP-over-L2TP
L2TP
tunnel.
467