Table of Contents
Advertisement
Serial port
n
n
7. If desired, you can verify the RealPort configuration. See
mode
and
8. After RealPort configuration is complete, you can open the Windows Properties dialog for the
COM ports on your computer that are configured for RealPort from within the Digi Navigator.
a. Launch the Digi Navigator if it is not currently open. A list of devices that have RealPort
enabled and configured displays in the RealPort Devices section at the bottom of the
application screen.
b. Click Open Device Manager to open the Windows Properties dialog for the COM ports on
your computer that are configured for RealPort. For more information, see
RealPort device
Discover the IP address using the Digi Navigator
You can use the
Digi Navigator
Make sure you have the device powered and connected the device to your network or computer with
an Ethernet cable. See
1.
Download and install
2. Launch the Digi Navigator.
3. The tool discovers the IX10 devices that are powered on and connected to your network. When
the process is complete, a list of the devices appears.
Connected to a network: By default, the HTTPS service is enabled and used to find an
n
IP address for the IX10. Other services can be enabled if needed from the Filters
section. See
Connected directly to a device or on a network with no DHCP server: In either of
n
these situations, a default IP address is assigned to the device. You can specify the
filters used to assign an IP address. See
4. Expand a device to display the IP address.
NEXT STEP: If you are performing the initial device set-up, you should proceed to the next step after
getting the device's IP address:
Install the Digi Navigator
This section explains how to download and install the Digi Navigator application.
IX10 User Guide
Close: Click Close to close the message. Configuration is complete.
Open Device Manager: Click Open Device Maanger if you want to do further
configuration to the COM ports. The Windows Properties dialog displays.
Configure the RealPort
service.
list.
to quickly discover the IP address for the IX10.
Connect to and access the Digi
the Digi Navigator.
Discover the IP address when connected to a
Configure RealPort from the Digi
Digi Navigator application
Configure the serial port for RealPort
Navigator.
network.
Discover the IP address when not on a
Navigator.
Manage the
network.
198
Advertisement
Table of Contents
