Digi Connect EZ 4 User Manual page 519

Services
Show DNS information
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show dns
> show dns
Interface
---------
eth1
eth1
eth1
eth1
eth1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect EZ 4/4i User Guide
command at the system prompt:
Label Server
----- ------------------------
192.168.3.1
fd00:2704::1
fe80::227:4ff:fe2b:ae12
fe80::227:4ff:fe44:105b
fe80::240:ffff:fe80:23b0
Configure DNS
Domain
------
519