Table of Contents
Advertisement
Firewall
a. Use the ? to determine available interfaces:
b. Set the interface. For example:
(config firewal portal portal1)> interface /network/interface/eth1
(config firewal portal portal1)>
5. Set the amount of time that a user session remains valid. After the session times out, the user
will be required to log in again.
(config firewall portal portal1)> timeout value
(config firewall portal portal1)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set Session timeout to ten minutes, enter either 10m or 600s:
(config firewall portal portal1)> timeout 600s
(config firewall portal portal1)>
6. Configure whether the portal can be accessed over an insecure connection.
(config firewall portal portal1)> http value
(config firewall portal portal1)>
where value is one of:
allow: Allows access to the portal page over an insecure connection (HTTP port 80).
n
redirect: Automatically redirects the request to a secure connection (HTTPS port 443).
n
disallow: Does not allow access over an insecure connection (HTTP port 80).
n
Note
This setting does not affect access to HTTP port 80 after the client has been granted
access to the portal.
7. Set the method that will be used to authorize the user:
(config firewall portal portal1)> auth value
(config firewall portal portal1)>
where value is one of:
none: Users are not required to enter any information to access the portal.
n
login: Users are required to authenticate with an account on this device. Users must be
n
part of a user group that allows access to this portal.
info: Users are required to complete a form to continue. The form fields may be
n
customize.
8. (Optional) Set the title of the portal page that the user will see when accessing the portal:
(config firewall portal portal1)> title "Corporate portal"
(config firewall portal portal1)>
Digi Connect EZ 4/4i User Guide
Configure captive portals
737
Advertisement
Table of Contents
