Manually Configure The Pc And Assign An Ip Address To The Device - Digi Connect EZ 4 User Manual

Hardware
Manually configure the PC and assign an IP address to the device
You can manually assign an IP address to the device.
Prerequisites
An Ethernet cable
n
A power supply
n
Determine the IP address that you want to assign to the device.
n
To configure your laptop and assign an IP address:
1. On your PC, navigate to the Ethernet network settings dialog.
2. Click the Internet Protocol Version 4 (TCP/IPv4) parameter.
3. Click Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties dialog appears.
4. Select Use the following IP address.
Note IMPORTANT: Make note of the current IP address entries for IP address, Subnet mask,
and Default gateway. You will need this information to complete the final step of the process.
5. Configure with the following details:
IP address for PC: 192.168.210.2
n
Subnet: 255.255.255.0
n
Gateway: 192.168.210.1
n
Digi Connect EZ 4/4i User Guide
must be connected to the device and your network.
must be connected to the device and the device powered on.
Discover the device's IP address: Additional methods
39