Table of Contents
Advertisement
Virtual Private Networks (VPN)
9. For FQDN, type the fully qualified domain name or IP address of the SCEP server.
10. (Optiona) For CA identity, type a string that will be understood by the certificate authority. For
example, it could be a domain name or a user name. If the certificate authority has multiple
CA certificates, this field can be used to distinguish which is required.
11. For Path, Type the HTTP URL path required for accessing the certificate authority. You should
leave this option at the default of /cgi-bin/pkiclient.exe unless directed by the CA to use
another path.
12. For Password, type the challenge password as configured on the SCEP server.
13. Click to expand Distinguished Name.
14. Type the value for each appropriate Distinguished Name attribute.
15. Click Apply to save the configuration and apply the change.
Command line
1. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Add a new SCEP client:
(config)> add network scep_client scep_client_name
(config network scep_client scep_client_name
)>
Digi Connect EZ 4/4i User Guide
IPsec
398
Advertisement
Table of Contents
