Digi Connect EZ 4 User Manual page 285

Hotspot
g. Type ... to return to the config prompt:
(config network interface hotspot_bridge_interface)> ...
(config)>
5. Create a new hotspot:
(config)> add network hotspot new_hotspot
(config network hotspot new_hotspot)>
New hotspots are enabled by default.
To disable:
n
(config network hotspot new_hotspot)> enable false
(config network hotspot new_hotspot)>
To enable, it it has been disabled:
n
(config network hotspot new_hotspot)> enable true
(config network hotspot new_hotspot)>
6. Add devices to the bridge:
a. Determine available devices:
(config network bridge new_hotspot_bridge)> .. .. interface lan device
?
Default value: /network/lan
Current value: /network/lan
(config network bridge new_hotspot_bridge)>
b. Add the appropriate device. For example, to add the Digi AP Wi-Fi access point:
(config network bridge new_hotspot_bridge)> add device end
/network/wireless/ap/digi_ap
(config)>
7. Set an access point, and Ethernet port, or a bridge for the hotspot's device:
a. Determine available devices:
(config network hotspot new_hotspot)> device ?
Device: Device to use for this hotspot interface.
Format:
/network/device/eth1
/network/device/eth2
/network/device/loopback
/network/bridge/hotspot_bridge
/network/bridge/lan
/network/bridge/new_hotspot_bridge
Digi Connect EZ 4/4i User Guide
Hotspot configuration
285