Startup Saved-Configuration - HP 6125G Command Reference Manual

6125 blade switch series fundamentals command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Parameters
None
Description
Use slave auto-update config to enable the configuration auto-update function for all the member
devices to automatically save the running configuration as the master device does when you execute the
save [ safely ] [ backup | main ] [ force ] command or the save filename all command.
Use undo slave auto-update config to disable the function.
If configuration auto-update is disabled, the save [ safely ] [ backup | main ] [ force ] command and the
save filename all command save the running configuration only to the master device.
To ensure configuration consistency across the IRF fabric, HP recommends enabling the function.
By default, the configuration file auto-save function is enabled.
The save command executed with only the file-url argument saves the running configuration only to the
specified path, regardless of whether the configuration auto-update function has been enabled.
Examples
# Enable configuration auto-update.
<Sysname> system-view
[Sysname] slave auto-update config

startup saved-configuration

Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration
View
User view
Default level
3: Manage level
Parameters
cfgfile: Specifies a configuration file name with the extension .cfg. The file must be stored in the root
directory of the storage media.
backup: Sets the configuration file as the backup next-startup configuration file.
main: Sets the configuration file as the main next-startup configuration file.
Description
Use startup saved-configuration to specify the configuration file to be used at the next startup for all IRF
member devices.
Use undo startup saved-configuration to configure all IRF member devices to start up with the factory
defaults at the next startup.
In an IRF fabric, the startup saved-configuration command applies to all IRF members. To successfully
configure the command, verify that the specified file has been saved to the root directory of the storage
media on each member.
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125g/xg

Table of Contents