Startup Saved-Configuration - HP 6125XLG Command Reference Manual

flash:/backup.cfg. Please wait...
Configuration is saved to flash successfully.
# Save the running configuration to the main next-startup configuration file without any confirmation
required.
<Sysname> save force
Validating file. Please wait....
Configuration is saved to device successfully.
# Save the running configuration to a file in the root directory of the flash memory, and specify the file
as the main next-startup configuration file.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
Slot 1:
Save next configuration file successfully.
Related commands
display current-configuration
•
display saved-configuration
•

startup saved-configuration

Use startup saved-configuration to specify a file as a next-startup configuration file for all IRF member
devices.
Use undo startup saved-configuration to configure all IRF member devices to start up with the factory
defaults at the next startup.
Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration
Default
No configuration file is specified for the next startup.
Views
User view
Predefined user roles
network-admin
Parameters
cfgfile: Specifies the name of a .cfg file. This .cfg file must already exist in the root directory of the flash
memory.
backup: Specifies the configuration file as the backup next-startup configuration file.
157