Startup Saved-Configuration - HP 6125XLG Command Reference Manual

Configuration is saved to flash successfully.
# Save the running configuration to the main next-startup configuration file without any confirmation
required.
<Sysname> save force
Validating file. Please wait....
Configuration is saved to device successfully.
# Save the running configuration to a file in the root directory of the storage medium, and specify the file
as the main next-startup configuration file.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
Slot 1:
Save next configuration file successfully.
Related commands
display current-configuration
•
• display saved-configuration

startup saved-configuration

Use startup saved-configuration to specify a file as a next-startup configuration file for all IRF member
devices.
Use undo startup saved-configuration to configure all IRF member devices to start up with the factory
defaults at the next startup.
Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration
Views
User view
Predefined user roles
network-admin
Parameters
cfgfile: Specifies the name of a .cfg file. This .cfg file must already exist in the root directory of storage
medium.
backup: Specifies the configuration file as the backup next-startup configuration file.
main: Specifies the configuration file as the main next-startup configuration file.
Usage guidelines
In an IRF fabric, the startup saved-configuration command applies to all IRF members. To successfully
configure the command, verify that the specified file already exists in the root directory of the storage
medium on each member.
137