Table of Contents
Advertisement
Configure Connect IT using the web user interface
Synchronize system time from the web UI
You can define the Connect IT time zone and specify the servers that should be used to synchronize its
time.
1.
Log in to the Connect IT web UI.
2. Click Configuration in the left pane.
3. Expand the System section.
4. Expand the Time section.
5. In the Timezone field, enter the time zone for the Connect IT's physical location. The time zone
is used to adjust the time for logged messages and to start
6. Specify the NTP servers used to synchronize the time on the Connect IT.
a. Expand the NTP servers section.
b. In the Server field, enter the name of the NTP server that is used to synchronize
c. If you want to enter an additional NTP server, click Add to add a new row and enter
7. Click Save at the bottom of the screen to save the changes.
View Connect IT status information
In the Status page in the web UI, you can view status information about the Connect IT, cellular
modem, network connections, tunnels, and the equipment connected to the serial ports.
The Status page displays by default when you open the web UI.
1.
Log in to the Connect IT web
2. Click Status in the left pane.
3. Click the desired tab to display status information.
Device Details: Displays status information about the Connect IT.
n
Cellular Details: Displays status information about the cellular modem, cellular
n
network connection, and the SIM cards.
Networks: Displays status information about the network interfaces and network
n
devices.
Tunnels: Displays status information about open tunnels.
n
Serial: Displays information about the status of the serial ports.
n
Download an archive of the supported MIBs
You can download a .zip archive of the MIBs supported by this device.
1.
Log in to the Connect IT web
2. Select the System tab in the left pane.
3. Scroll down to the SNMP MIBs section.
4. Click Download MIBs. The .zip archive file is downloaded to your downloads folder.
Digi Connect IT® 16/48 User Guide
the time. The syntax is: {hostname|UPv4_address|IPv6_address}
the NTP server name.
UI.
UI.
Synchronize system time from the web UI
scheduled system
maintenance.
53
Advertisement
Table of Contents
