Table of Contents
Advertisement
Configure the Connect IT 16/48
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Authentication
3. Expand the Users section.
4. Click Add or + to
5. Select Enable. If the user profile is not enabled, the user will not be able to log in.
6. Enter the password for this user in the Password field.
If the Show option is selected, the password appears in the field. If it is not selected, a series of
dots appear.
7. Assign the user to a group.
a. Expand the Groups section.
b. Click Add or +.
c. From the Group list box, select the desired group.
8. Click Save or Apply.
Configure two-factor authentication for a user
You can configure two-factor authentication for a user.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Authentication
3. Expand the Users section.
4. Expand the group that you want to configure for two-factor authentication.
5. Expand the Two-factor authentication section.
6. Click Enable.
7. Complete the fields in the section.
8. Click Save or Apply.
Update the firmware on the Connect IT
You can update the firmware on the Connect IT from either Remote Manger or the local web user
interface.
Update Connect IT firmware from the local web user interface
You can update the firmware on the Connect IT. Before you begin, you must download the desired
version of the firmware onto your PC.
1.
Download the Connect IT firmware to your
2.
Log in to the Connect IT local web user
3. Select the System tab in the left pane.
4. In the Device Firmware section, click Choose File.
Digi Connect IT® 16/48 User Guide
add a new user
name.
interface.
Update the firmware on the Connect IT
screen.
screen.
PC.
18
Advertisement
Table of Contents
