Table of Contents
Advertisement
Configure Connect IT using Remote Manager
6. Create an IPsec tunnel.
a. Expand the Tunnels section.
b. Expand the IPsec tunnel section.
c. Click the plus sign icon to define an IPsec tunnel. The Add IPsec tunnel dialog
d. Enter an IPsec tunnel name in the field.
e. Click OK.
f. The tunnel is enabled by default. Verify that the Enable slider is blue.
g. Complete the fields in each of the sections. You can hover over a field name to
7. Click Apply at the top of the screen to save the changes.
Configure an OpenVPN server from Remote Manager
You can configure an OpenVPN server and client list.
1.
Log into your Remote Manager
2.
Access the Remote Manager configuration
3. Click Config > VPN in the toolbar. The VPN page appears.
4. Expand the OpenVPN section.
5. Define an OpenVPN server.
a. Expand the Servers section.
b. Expand the OpenVPN server section.
c. Click the plus sign icon to define an OpenVPN server. The Add OpenVPN server
d. Enter an OpenVPN server name in the field.
e. Click OK.
f. The tunnel is enabled by default. Verify that the Enable slider is blue.
g. Complete the fields in each of the sections. You can hover over a field name to
6. Create a client list for the OpenVPN server.
a. Expand the Clients section.
b. Expand the OpenVPN client section.
c. Click the plus sign icon to define a client. The Add OpenVPN client dialog appears.
d. Enter a client name in the field.
e. Click OK.
7. Click Apply at the top of the screen to save the changes.
Digi Connect IT® 16/48 User Guide
appears.
display information about what you should enter in each field.
account.
dialog appears.
display information about what you should enter in each field.
Configure VPN using Remote Manager
page.
22
Advertisement
Table of Contents
