Table of Contents
Advertisement
Configure Connect IT using Remote Manager
Field
Location
Banner
6. Click Apply at the top of the screen to save the changes.
Configure VPN using Remote Manager
Configure an IPsec tunnel for a VPN from Remote Manager
You can configure an IPsec tunnel for a VPN.
1.
Log into your Remote Manager
2.
Access the Remote Manager configuration
3. Click Config > VPN in the toolbar. The VPN page appears.
4. Expand the IPsec section.
5. Set the NAT keep alive time.
a. Expand the advanced section.
b. In the NAT keep alive time field, enter the length of time to keep NAT alive for
6. Create an IPsec tunnel.
a. Expand the Tunnels section.
b. Expand the IPsec tunnel section.
c. Click the plus sign icon to define an IPsec tunnel. The Add IPsec tunnel dialog
d. Enter an IPsec tunnel name in the field.
e. Click OK.
f. The tunnel is enabled by default. Verify that the Enable slider is blue.
g. Complete the fields in each of the sections. You can hover over a field name to
7. Click Apply at the top of the screen to save the changes.
Configure an OpenVPN server from Remote Manager
You can configure an OpenVPN server and client list.
1.
Log into your Remote Manager
2.
Access the Remote Manager configuration
3. Click Config > VPN in the toolbar. The VPN page appears.
Digi Connect IT® 4 User Guide
account.
IPSEC tunnels. the default is 40 seconds. The syntax for the entry is number
{w|d|h|m|s}.
appears.
display information about what you should enter in each field.
account.
Configure VPN using Remote Manager
Description
A description of the Connect IT's physical location
A banner message that displays when a user accesses
terminal services on this device.
page.
page.
23
Advertisement
Table of Contents
