Table of Contents
Advertisement
Command Reference Guide
VLAN D
ATABASE
To activate the Config VLAN Database mode, enter the vlan database command at the Enable security
mode prompt. For example:
>enable
#vlan database
(vlan)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
do
on page 32
end
on page 33
exit
on page 34
All other commands for this command set are described in this section in alphabetical order.
abort
on page 1168
apply
on page 1169
reset
on page 1170
show [changes <vlan id> | current | proposed]
vlan <vlan id>
on page 1172
vlan <vlan id> media [ethernet]
vlan <vlan id> name <vlan name>
vlan <vlan id> state [active | suspend]
61200510L1-35E
C
ONFIGURATION
on page 1171
on page 1173
on page 1174
on page 1175
Copyright © 2005 ADTRAN
VLAN Database Configuration Command Set
C
S
OMMAND
ET
1167
Hide quick links:
Advertisement
Chapters
Table of Contents
