Stapler Major Components
Refer to
Figure
14. The major Stapler components are:
•
Staple Head Home Sensor – The home sensor detects that the staple head is at the
home position.
•
Staple Motor - This DC motor drives the staple head.
•
Low Staple Sensor - This photo sensor detects the presence of the staple cartridge and
the quantity of staples that remain.
•
Staple Ready Sensor - This photo sensor detects that a staple has reached the staple
head.
Figure 14 Stapler major components
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Stapling Positions
Sheets of paper in the compile tray are stapled with only a single staple on the front corner.
Stapling positions relative to a page placed in the document handler or placed on the platen
glass are different for LEF paper and SEF paper, as shown. Refer to
Figure 15 Stapling positions
April 2017
8-71
Figure
15.
Product Technical Overview