Xerox VersaLink B7025 Service Manual page 1303

Main heater rod
Figure 3 Fuser main components
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Fuser PWB
Heat roll thermistor
Sub heater rod
Fuser NC sensor
Thermostats
Fuser Power
Main and sub heater on signal is supplied from
J504 on the LVPS, PL 1.10 Item
on the LVPS, Figure 4, to the fuser power connector,
Control (1 of 2).
The drive PWB controls fusing temperature as required by the temperature control logic.
Figure 4 Fuser power (LVPS)
April 2017
8-57
P/J419 on the drive PWB,
8. With the fuser relay energized, power is supplied from
Figure 5. Refer to BSD 10.1 Fusing Heat
P/J504
P2
Product Technical Overview
PL 1.10 Item 3 to P/
P2