Rep 2.12.1 Tray 5 Lift Motor - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.12.1 Tray 5 Lift Motor

Parts List on PL 2.12
Removal
Turn power off and disconnect the power plug.
1. Open the Upper Tray 5 Assembly
Assembly from the machine (REP 2.9.1).
1. Pull up the lever and open the Upper Tray 5 Assembly.
Figure 1 Opening the Upper Tray 5 Assembly
2. Disconnect the connector (Figure 2).
1. Pull outward to extend the tray, then pivot the tray up.
2. Remove the screws (3).
3. Remove the lower cover.
4. Disconnect the connector.
5. Remove the wire from the hooks (3).
Repairs and Adjustments
REP 2.12.1
WARNING
(Figure 1), or for ease of access, remove the Tray 5
Figure 2 Disconnecting the connector
3. Remove the bracket (Figure
1. Remove the screw.
2. Remove the bracket.
1/05
4-30
manuals4you.com manuals4you.com
3).
DocuColor 12/DCCS50
Reissue