Table of Contents
Advertisement
Working with DIMMs and the CPU
Replacing the CPU
The 703t server motherboard provides two connectors for Xeon processor chips, but only one
is populated for Avaya CallPilot
on the CPU1 connector. A processor terminator board is not required.
CPU replacement package contents
The CPU assembly package contains the following:
• 2.0 GHz AT 400 MHz FSB microprocessor with 512 kbytes of L2 cache memory
Note:
A higher frequency microprocessor may be provided if the above mentioned frequency
becomes obsolete.
• heat sink with guides and clips
• syringe containing heat sink grease
• heat sink housing
• fan
Warning:
Risk of equipment damage
The microprocessor is extremely sensitive to electrostatic discharge (ESD) and requires
careful handling to avoid static damage. To prevent ESD, perform the replacement at an
ESD workstation or use an ESD wrist strap.
150
Avaya CallPilot® 703t Server Maintenance and Diagnostics
Caution:
Risk of equipment damage and data corruption
Use extreme care when installing a DIMM. Too much pressure can damage the
socket. DIMMs are keyed and can be inserted in only one way.
Result: The plastic ejector levers close automatically indicating correct installation.
®
. For a single-CPU configuration, the CPU must be installed
December 2010
Advertisement
Table of Contents
