Advertisement
AVAYA E1/QSIG
Issue
Revision
Date
Version F
11/13/03
Version G
12/17/03
Version H
01/06/04
Version I
04/01/04
Version J
05/14/04
Version K
06/25/04
Version L
04/22/05
Version M
09/02/05
Version N
10/18/05
Version O
01/26/06
Version P
04/11/06
Version Q
07/20/06
Version M
02/01/07
Version N
10/18/05
Version O
01/26/06
Version P
04/11/06
Version R
02/01/07
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
CHANGE HISTORY
Reason for Change
Updated Route Pattern to support multiple MAS. Changed LAR
from "none" to "rehu"
Updates to meet Release 1.1
Additional MM1.1 updates.
Added DCS+ or QSIG as the only supported networks for
multiple PBX support.
Also, changed the Port Group requirements to indicate reserve
ports for Outgoing ports.
Added Consideration 8.11, 8.12 & 8.13
Removed support of the IP600 (S8100) PBX
Included NOTE on page 3, updated 8.12
Updated remote subscribers' configuration.
Updated to support ACM 3.0
Corrected parameters on various screens in Section 5.0.
Added:
• MM 3.0 to support release section 2.0
• New MWI screen shot with Scheduled MWI updates
parameter noted for MM3.0
Added note (in red) to Consideration 8.1; also removed
confusing portion of side note regarding Trunk Group members
on page 9
Changed in Section 5.0:
• Added note for multiple length extensions on system-parameter
features screen.
• Added sidebar adjacent signaling group form to explain NCA-
TSC, CA-TSC, and Trunk Group for NCA-TSC
Section 6.0 - Changed information clarifying what origin number
entry should be on outgoing tab for PBX Type
Updated to support ACM 3.0
Corrected parameters on various screens in Section 5.0.
Added:
• MM 3.0 to support release section 2.0
• New MWI screen shot with Scheduled MWI updates
parameter noted for MM3.0
Changed in Section 5.0:
• Added note for multiple length extensions on system-parameter
features screen.
• Added sidebar adjacent signaling group form to explain NCA-
40
Advertisement
