E610 And Detailed Codes - Canon imageRUNNER ADVANCE 8105 Series Service Manual

2
Technology > Main Controller > Controls > HDD Encryption/ Mirroring Kit (optional)

E610 and detailed codes

Detailed
E code Cause (Detected Error)
Code
E610 Failure in the HDD encryption key
0001 Failure in the HDD encryption key
(Error in hardware configuration). No
encryption board is installed.
0002 Failure in the HDD encryption key
(Error in hardware configuration).
The memory space is insufficient for
encryption operation.
0101 Failure in the HDD encryption key (Error
in initialization). Failed to initialize the
memory space where the key is stored.
0102 Failure in the HDD encryption key (Error
in initialization). Failed to initialize the
encryption processing unit.
0201 Failure in the HDD encryption key.
Error in the encryption processing unit.
0202 Failure in the HDD encryption key.
Error in the encryption processing unit.
0301 Failure in the HDD encryption key (Error
in the encryption key). Failed to create
the encryption key.
0302 Failure in the HDD encryption key (Error
in the encryption key). Detected the
failure in the encryption key.
0303 Failure in the HDD encryption key (Error
in the encryption key). Detected the
failure in the encryption key.
0401 Failure in the HDD encryption key (Error
in the encryption processing). Error is
detected during the encryption process.
0402 Failure in the HDD encryption key (Error
in the encryption processing). Error is
detected during the decoding process.
2 Technology > Main Controller > Controls > HDD Encryption/ Mirroring Kit (optional)
Actions
Ask the user to check the hardware
configuration.
Ask the user to check the hardware
configuration.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (SRAM). Note
that this error initializes the HDD.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (SRAM). Note
that this error initializes the HDD.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (the encryption
board).
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (the encryption
board).
T-2-18 T-2-18
2-30
2-30