Rep 8.39 Tray 1 And Tray 2 Retard Roll Friction Clutch; Rep 8.40 Tray 3 Paper Feed Assembly (W/Tag 151) - Xerox WorkCentre 5790 Series Service Manual

REP 8.39 Tray 1 and Tray 2 Retard Roll Friction Clutch

Parts List on PL 8.26
Removal
Switch off the electricity to the machine,
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the retard roll, REP 8.35.
2. Remove the clutch coupling, PL 8.26 Item
3. Remove the friction clutch, PL 8.26 Item
Replacement
1. The replacement is the reverse of the removal procedure.
Repairs/Adjustments
REP 8.39, REP 8.40
WARNING
GP 14. Disconnect the power cord from the
WARNING
13.
2.

REP 8.40 Tray 3 Paper Feed Assembly (W/TAG 151)

Parts List on PL 8.32.
Removal
Switch off the electricity to the machine,
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Pull out tray 3.
2. Remove the rear cover, PL 7.25 Item
May 2013
4-162
WARNING
GP 14. Disconnect the power cord from the
WARNING
1.
Xerox® WorkCentre® 5790 Family