REP 5.9 Retard Roll
Parts List on
PL 20.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Open Top Cover.
2.
Remove following:
a.
Front Cover (PL 20.1).
b.
Entrance Tray (PL 20.1).
3.
Remove Lower Chute Assembly
(REP
4.
Remove Retard Roll (Figure 1).
2
Remove Spring
3
Remove Clip
4
Remove Shaft
Figure 1 Removing Retard Roll
Repairs and Adjustments
REP 5.9
WARNING
5.8).
1
Make note of
position of
plastic guide
5
Remove
Bracket
6
Remove Shaft
and Retard Roll
Replacement
While replacing Retard Roll, make sure that Retard Roll Plastic Guide is in correct position.
6/02
4-26
CAUTION
Prelaunch Training/Review
DC1632/2240