REP 5.4 DADF Control PWB
Parts List on PL
PL 20.3
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Rear Cover
(REP
5.18).
PWBs can be damaged by electrostatic discharge. Observe all ESD procedures.
2.
Remove DADF Control PWB
(Figure
1
Disconnect connectors (7)
Figure 1 Removing DADF Control PWB
Repairs and Adjustments
REP 5.4, REP 5.5
WARNING
CAUTION
1).
2
Remove PWB from
PWB supports (3)
REP 5.5 Feed Motor Assembly
Parts List on
PL 20.4
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Rear Cover
(REP
5.18).
2.
Remove Feed Motor Assembly
2
Release clamps and
remove harness
1
Disconnect
connector
Figure 1 Removing Feed Motor Assembly
09/03
4-26
WARNING
(Figure
1).
DC 3535/2240/1632, WC M24
3
Loosen
screws
4
Remove
Feed Motor
Assembly
Initial issue