Show Ip Igmp Ssm-Mapping - D-Link DES-7200 Cli Reference Manual

Chapter 38 IGMP Configuration Commands
38.2.3

show ip igmp ssm-mapping

Use this command to show the ssm-map information of the IGMP configuration.
show ip igmp ssm-mapping [ A.B.C.D )
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
38-18
IGMP Snooping is globally enabled|
IGMP Snooping is enabled on this interface
IGMP Snooping fast-leave is not enabled
IGMP Snooping querier is not enabled
IGMP Snooping report suppression is enabled
Parameter
A.B.C.D
All the ssm-map information of the IGMP is displayed.
Global configuration mode.
If all the parameters are not used, the related configurations are
displayed.
Show the ssm-map configuration information:
DES-7210# sh ip igmp ssm-mapping
SSM Mapping: Enabled
Database : Static mappings configured
Show the group information of group 233.3.3.3 to be mapped
DES-7210#show ip igmp ssm-mapping 233.3.3.3
Group address: 233.3.3.3
Database : Static
Source list : 192.3.3.3
: 3.3.3.3
DES-7200 CLI Reference Guide
Description
Source address to be mapped