Usb Configuration Commands; Related Configuration Commands; Show Usb - D-Link DES-7200 Cli Reference Manual

Hide thumbs Also See for DES-7200:

Table of Contents

DES-7200 CLI Reference Guide

The commands described here are used to query and remove USB devices in the CLI

environment in the main program.

View USB device information: show usb command

Remove a USB device: usb remove command

Use this command to show the information about the inserted USB device in the system.

Privileged EXEC mode.

Device information is displayed if there is a USB device. Otherwise,

there is no output.

The following example shows the information about the USB device:

DES-7210# sh usb

Device: USB Mass Storage Device :

Disk Partitions:

1: /dev/uba/disc0/part1 --> /mnt/uba

size : 131072000B(125MB)

The meaning of the information is as below:

Chapter 69 USB configuration Commands

configuration