Chapter 42 MPLS Configuration Commands
Examples
42.1.39 show mpls summary
Use this command to show the MPLS global configurations.
show mpls summary
Command
mode
Usage
guidelines
Examples
42-40
DES-7210# show mpls ldp session
Session-5-UP:LDP Identifier 192.168.0.2:0 State OPERATIONAL
session not backup msg data
session hold msg count: 0 ,write thread (nil),historymax 1
Remote dest 192.168.4.1:646 , Our is ACTIVE
Keepalive recv timer is on , Hold time is 30 sec
Keepalive send timer is on , Interval is 10 sec
Max PDU is 4096
Path vector limit is 0
Distribution mode is UNSOLICITED
Loop detection mode is NONE
Backoff timer is off
Session attach socket FD[2572], read thread is 0xc6019c0, write thread
is (nil)
LDP Peer Address:
192.168.4.1
192.168.0.2
192.168.3.2
Privileged user mode.
This command allows you to view the basic information of the MPLS,
including maximum/minimum available labels, information of each
label space, label space used by each interface, and total number of
interfaces with MPLS enabled.
DES-7210# show mpls summary
Per label-space information:
Label-space 0 is using minimum label: 16 and maximum label: 1048575
Label-switching Interface:
Interface
GigabitEthernet 4/1
DES-7200 CLI Reference Guide
Label space
0