Show Dot1X Max-Req - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
44.6.5

show dot1x max-req

Use this command to show the maximum number of authentication request retransmissions
to the client.
show dot1x max-req
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
N/A.
N/A.
Privileged mode.
N/A.
The following example shows the maximum number of authentication
request retransmissions:
DES-7210# show dot1x max-req
max-req: 2 times
DES-7210#
Command Description
dot1x auth-mode Set the 802.1x authentication mode.
Set the maximum number of authentication
dot1x max-req
request retransmissions.
dot1x
Set the port to participate in authentication.
port-control auto
dot1x Set the maximum number of the supplicant
reauth-max re-authentications.
dot1x
Set the re-authentication attribute.
re-authentication
Set the time the device waits before
dot1x timeout
quiet-period reauthentication.
dot1x timeout Set the re-authentication period for the
re-authperiod supplicant.
dot1x timeout Set the authentication timeout between the
server-timeout device and authentication server.
Chapter 44 802.1X Configuration Commands
44-31