Chapter 33 BGP4 Configuration Commands
Examples
Related
commands
Platform
description
33.1.45 neighbor description
Use this command to set a descriptive sentence for the specified peer (group). The no form
of the command removes the setting.
neighbor {peer-address | peer-group-name} description text
no neighbor {peer-address | peer-group-name} description
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
33-42
DES-7210(config)# router bgp 60
DES-7210(config-router)# neighbor 10.1.1.1 remote-as 80
DES-7210(config-router)# neighbor 10.1.1.1
default-originate
Command
Description
router bgp
Enable the BGP protocol.
neighbor
Configure the BGP peer.
remote-as
Parameter
Description
peer address
IP address of the peer
peer-group-name
Name of the peer group of up to 32 characters
Text for describing the peer (group) of up to 80
text
characters
Disabled.
BGP configuration mode.
This command is used to add descriptive characters for the peer
(group). This may help remember the features and characteristics of
the peer (group).
DES-7210(config)# router bgp 60
DES-7210(config-router)# neighbor 10.1.1.1 remote-as 80
DES-7210(config-router)# neighbor 10.1.1.1 description xyz.com
DES-7200 CLI Reference Guide