Default-Information Originate(Rip) - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Platform
description
Version
description
31.1.4

default-information originate(RIP)

Use this command to generate a default route in the RIP process. The no form of this
command deletes the generated default route.
default-information originate [always] [metric metric-value] [route-map map-name]
no default-information originate [always] [metric] [route-map map-name]
Parameter
description
Default
configuration
Command
mode
Parameter Description
(Optional) Enable RIP to generate the
default route, no matter whether the
always
default route exists or not.
metric (Optional) The original metric value of
metric-value the default route, in the range of 1-15.
(Optional) Name of the associated
route-map
route-map.
map-name
associated by default.
No default route is generated by default.
The metric value of the generated default value is 1.
Routing process configuration mode.
Chapter 31 RIP Configuration Commands
Route-map is not
31-5