D-Link DES-7200 Hardware Installation Manual

Hide thumbs Also See for DES-7200:
Table of Contents

Advertisement

DES-7200
Hardware Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DES-7200

  • Page 1 DES-7200 Hardware Installation Guide...
  • Page 2 All rights reserved. D-Link Corporation reserves all copyrights o f t his do cument. A ny r eproduction, ex cerption, ba ckup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of D-Link Corporation is prohibited.
  • Page 3: Document Structure

    Documentation CD-ROM: The documentation of D-Link Corporation switches is stored in the CD-ROM package, which is provided to you together with the product you purchase. The CD-ROM is updated frequently, and may be more current than the printed documents.
  • Page 4: Documentation Conventions

    D-Link C orporation provides ex cellent technical s upport s ervices f or a ll o ur products. You can obtain the technical assistance you need through any of the following channels: Technical Assistance D-Link Corporation Website, On D-Link Corporation Website, you can obtain the latest ...
  • Page 5: Table Of Contents

    Contents Product Overview ..........................1-1 Product Overview ........................1-1 Technical Specifications of DES-7206/7210 ................1-2 1.2.1 Product Features ......................1-2 1.2.2 Technical Specifications ....................1-4 Product Appearance ........................1-6 1.3.1 Appearance of the DES-7210 ..................1-6 1.3.2 Appearance of the DES-7206 ..................1-7 DES-7206/7210 Hardware Composition ..................
  • Page 6 Unpacking Inspection Requirements ..................2-9 2.5.1 Checking Goods ......................2-9 Product Installation ..........................3-1 Installation Flow ......................... 3-2 Installation Verification ....................... 3-3 Cabinet Installation ........................3-3 3.3.1 Precautions ........................3-3 3.3.2 Simple Installation Steps ....................3-3 Mounting the DES-7210/7206 into the Cabinet ................. 3-4 3.4.1 Precautions ........................
  • Page 7 General Flow for Troubleshooting Installation Faults ..............5-1 Common Troubleshooting Procedures..................5-2 Appendix A Connectors and Connection Media B Mini-GBIC and 10G XENPAK Modules Warranties and Tech Support Information...
  • Page 8: Product Overview

    I t is ideal f or l arge-scale network core backbone and heavy traffic node switch. By expanding with high-performance multi-service c ards, t he DES-7200 series s witches s upport po licy r outing a nd IPV6, a nd satisfies customers’ flexible and complex application requirements.
  • Page 9: Technical Specifications Of Des-7206/7210

     Complicated f unctions of t he DES-7200 such as s witching, r outing, A CL, and Q oS ar e implemented v ia har dware, w hich avoids t he i mpact pr oduced b y t he implementation v ia software on high-speed data processing.
  • Page 10 Supporting the PoE technology  DES-7200 provides c able cards s upporting P oE. P oE des ign c ompletely c onforms t o t he requirements of the IEEE 802.3af standards. DES-7210 provides up to 198 fast Ethernet PoE ports; DES-7206 provides up to 192 fast Ethernet PoE ports, offering flexible network expansion for large enterprise parks.
  • Page 11: Technical Specifications

    DES-7200 Hardware Installation Guide 1.2.2 Technical Specifications Table 1-1 Technical Specifications Product Model DES-7210: DES-7206: 10 (two for the management engine 6 (two for the management engine Module slot modules) modules) VLAN IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ae, IEEE802.3x, IEEE802.3ad, IEEE802.3af, IEEE802.1p, IEEE802.1x, IEEE802.3ab, L2 Protocol IEEE802.1Q, IEEEE802.1d, IEEEE802.1w, IEEEE802.1s, RERP,...
  • Page 12 DES-7200 Hardware Installation Guide Product Model DES-7210: DES-7206: Power supply Supported (must be the same type [all AC or DC]) redundancy 7210-FAN (supporting hot swap 7206-FAN (supporting hot swap ability ability and fault alarming) and fault alarming) Environment GB9254-1998 FCC Class A...
  • Page 13: Product Appearance

    DES-7200 Hardware Installation Guide Product Appearance 1.3.1 Appearance of the DES-7210 Figure 1-1 Appearance of the DES-7210 Air outlet layer: the air outlet layer of the entire system, discharging air on three sides; Fan tray: the slot for the fan tray, which is the main heat dissipation unit of the system;...
  • Page 14: Appearance Of The Des-7206

    DES-7200 Hardware Installation Guide 1.3.2 Appearance of the DES-7206 Figure 1-2 Appearance of the DES-7206 Module layer: offering up to 6 module slots; Power layer: supporting two AC or DC power supplies for the maximum. Air outlet: located at the back of the chassis to discharge air.
  • Page 15: Module Plug-In Frame

    412 mm, dept h of 350 mm, and t hickness of 2. 0 mm. The DES-7200 backplane implements the interconnection of high-speed data links between the switching management cards and module line cards and that of various management and control signals.
  • Page 16: Ventilation/Heat Dissipation System Of The Des-7206/7210

    DES-7200 Hardware Installation Guide The slots for the two management modules are in the middle, and they are identified as M1 and M2 from left to right. The other eight module line cards are numbered as 1-8 from the left to the right.
  • Page 17: Des-7206/7210 Modules

    DES-7200 Hardware Installation Guide Figure 1-4 Ventilation/Heat Dissipation Solution of the DES-7206 This structure is designed with air inlet from the front panels of the modules, and air outlet at the back. Six 120*120*38 fans are used to blow the air to the outside for convection and ultimately heat dissipation.
  • Page 18: 7200-Cm1~4 Control Modules

    DES-7200 Hardware Installation Guide 7200-2XG module: I t provides t wo 10-Gigabit XFP i nterfaces. It f eatures t he f unctions of layer-2/3 wire speed switching and routing, and supports multi-mode XFP module with the wavelength being 850nm, single-mode XFP module with that being 1310nm, and single XFP module with that being 1550nm.
  • Page 19 DES-7200 Hardware Installation Guide In t he s ystem, t here m ust be at least one 7200 Control Module f or t he system t o w ork nor mally. However, you are r ecommended t o c onfigure this module for both slots for higher reliability.
  • Page 20 DES-7200 Hardware Installation Guide The Firmware v10.0 does not support any USB interface. To use a USB interface, you must adopt the Firmware v10.1 or a later version. Note To secure data and prevent damage on the device, it is recommended to use qua lified U SB f lash di sk.
  • Page 21: 7200-24G Module

    DES-7200 Hardware Installation Guide Product Model 7200-CM1 7200-CM2 7200-CM3 7200-CM4 GB9254-1998 FCC Class A Safety regulation GB4943-2001 MTBF 246,987hrs 240,558hrs 174,420hrs 173,868hrs Operating 0 to 40°C temperature Storage -40 to 70°C temperature Operating humidity 10% - 90% RH Weight Net weight: 2.8 Kg Dimensions 436*346×30 ( Lx W x Hmm)
  • Page 22: 7200-24 Module

    DES-7200 Hardware Installation Guide Table 1-4 LEDs on the Front Panel Sign Description Detailed Information OFF: The module has not been powered on Red: Module fault Status System LED Flashing green: The module is initializing Solid green: The module has finished initialization and can...
  • Page 23 DES-7200 Hardware Installation Guide Figure 1-10 Basic Appearance of the 7200-24 1. Interface 7200-24: It provides twelve 10/100/1000BASE-T electrical ports and twelve optical/electrical combo 1000M interfaces, and supports up to twenty-four 1000BASE-T interfaces or 12+M 1000BASE-T interfaces and N 1000BASE-X interfaces, where M plus N equals 12. When the f unction of aut omatic nego tiation is en abled, t he 100 0M el ectrical i nterface s upports automatic MDI/MDI-X identification.
  • Page 24: 7200-48 Module

    Figure 1 -11 shows t he ba sic app earance of t he 7200-48, t he l ine c ard m odule of t he DES-7200 series. The 7200-48 provides 44 10/100/1000BASE-T electrical 1000M interfaces and 4 optical/electrical combo 1000M interfaces, which deliver L2/L3 wire-speed switching.
  • Page 25 DES-7200 Hardware Installation Guide 2. LEDs The 7200-48 provides various system LEDs, as described in the following table: Table 1-8 LEDs on the Front Panel Sign Description Detailed Information OFF: The module has not been powered on. Red: Module fault...
  • Page 26: 7200-2Xg Module

    Figure 1-12 shows the basic appearance of the 7200-2XG, which is the line card module of the DES-7200 series. 7200-2XG provides t wo 10-Gigabit XFP interfaces and f eatures the function of layer-2/3 wire speed switching. The 7200-2XG is hot swappable, while supporting hot swappability of the XFP ports.
  • Page 27: 7200-4Xg Module

    Figure 1 -13 shows t he basic app earance of t he 7200-4XG, t he l ine c ard m odule of t he DES-7200 s eries. 7200-4XG provides four 10-Gigabit XFP i nterfaces an d f eatures t he functions of layer-2/3 wire speed switching.
  • Page 28: 7200-24P Module

    Figure 1-14 shows the basic appearance of the 7200-24P, which is the line card module of the DES-7200 s eries. 7200-24P provides t welve 1 0/100/1000BASE-T el ectrical por ts and twelve optical/electrical combo 1000M interfaces, and supports up to twenty-four 1000BASE-T i nterfaces or 12+ M 1 000BASE-T i nterfaces and N 10 00BASE-X i nterfaces, where M p lus N e quals 12.
  • Page 29 DES-7200 Hardware Installation Guide The 7200-24P provides twelve SFP optical ports and 10/100/1000BASE-T ports t hat ar e i n t he c ombo f orm. I n ot her words, eac h SFP por t corresponds t o on e 1 0/100/1000BASE-T por t, and on ly on e port can be used at a time, with the other being unavailable.
  • Page 30: 7200-48P Module

    Figure 1 -15 shows t he b asic appear ance of t he 7200-48P, t he l ine c ard m odule of t he DES-7200 s eries. 7200-48P provides 44 10/100/1000BASE-T e lectrical 1000M i nterfaces and 4 optical/electrical c ombo 1000M interfaces, and s upports up to 48 1000BASE-T interfaces or 44+M 1000BASE-T interfaces and N 1000BASE-X interfaces where M plus N equals 4.
  • Page 31 DES-7200 Hardware Installation Guide 7200-48P does not support the hot pull-out operation. You need to perform the following operations to achieve it: Disconnect all cables connected to the cable card ports; Warning Hold the Mode button for over three seconds until all LEDs on the cable card ports go off;...
  • Page 32: 7200-24Ge Module

    Figure 1 -16 shows t he ba sic app earance of t he 7200-24GE, t he l ine c ard m odule of t he DES-7200 series. 7200-24GE 24 1000M and 100M combo SFP interfaces, that is, it supports 100 0BASE-X an d 100 BASE-X m odes. It f eatures t he f unction o f l ayer-2/3 w ire speed switching.
  • Page 33: 7200-24G2Xg Module

    1.6.10 7200-24G2XG Module Figure 1-17 shows the basic appearance of 7200-24G2XG, the link card of DES-7200 series. 7200-24G2XG comes with two 10G XFP ports, 12 gigabit SFP ports and 12 gigabit optical-electrical m ultiplex ports, and s upports up t o 2 X FP ports pl us 24 1000BASE-X interfaces, or 2 XFP ports plus 12+M 1000BASE-X interfaces + N 1000BASE-T interfaces where M+ N= 12.
  • Page 34 DES-7200 Hardware Installation Guide 1. Interface 7200-24G2XG comes with two 10G XFP ports, 12 gigabit SFP ports and 12 gigabit optical-electrical multiplex ports, and offers gigabit-level line rate of Layer 2/3 switching. With auto-negotiation enabled, the gigabit electrical port supports automatic MDI/MDI-X identification.
  • Page 35: 7200-Ase3 Module

    DES-7200 Hardware Installation Guide 7200-24G2XG Product Model Hot swappability Supported Power consumption <75W GB9254-1998 FCC Class A Safety regulation GB4943-2001 MTBF 151,800hrs Operating 0 to 40°C temperature Storage -40 to 70°C temperature Operating humidity 10% to 90% RH Weight Net weight: 2.8 Kg...
  • Page 36: 7206/7210-Fan Module

    DES-7200 Hardware Installation Guide 7200-ASE3 Product Model GB9254-1998 FCC Class A Safety regulation GB4943-2001 MTBF 172,738hrs Operating 0 to 40°C temperature Storage -40 to 70°C temperature Operating humidity 10% to 90% RH Weight Net weight: 2.8 Kg Dimensions 436*346*45mm ( L x W x H) 1.6.12...
  • Page 37: 7200-1200Dc/2000Dc Power Module

    DES-7200 Hardware Installation Guide 1.6.14 7200-1200DC/2000DC Power Module As the D C po wer m odule of t he s ystem, t he 7200-1200DC/2000DC provides t he i nput interface of -48V DC power supply for the DES-7210/7206. The DES-7210/7206 system supports 1+1 redundancy for the DC power supply 7200-1200DC/2000DC.
  • Page 38: Preparation Before Installation

    DES-7200 Hardware Installation Guide Preparation Before Installation Safety Suggestions To av oid personal i njury an d equipment d amage, p lease c arefully read t he s afety suggestions before you install the DES-7210/7206. The following safety suggestions do not cover all possible dangers.
  • Page 39: Electrical Safety

    DES-7200 Hardware Installation Guide Figure 2-1 Schematic Diagram for Correctly Moving the DES-7210 Figure 2-2 Schematic Diagram for Correctly Moving the DES-7206 Do not move the equipment by grasping the panel, power supply handle, ventilation h oles of t he c hassis, as t hey are not d esigned t o bear t he weight of t he e ntire eq uipment.
  • Page 40: Static Discharge Damage Prevention

    DES-7200 Hardware Installation Guide Do not maintain the equipment alone when it is energized, unless absolutely necessary.  Be sure to make a careful check before you shut down the power supply.  Do not pl ace t he e quipment i n a d amp/wet location. D o no t l et an y liquid e nter t he ...
  • Page 41: Laser Safety

    DES-7200 Hardware Installation Guide 2.1.5 Laser Safety Among the modules supported by the DES-7210/7206, there are a great number of optical modules that are Class I laser products. Therefore, pay attention to the following during your use of this product: When a fiber transceiver works, ensure that the port has been connected with an optical ...
  • Page 42 DES-7200 Hardware Installation Guide Figure 2-3 Schematic Diagram for the Ventilation of the DES-7210 Figure 2-4 Schematic Diagram for the Ventilation of the DES-7206...
  • Page 43: Temperature And Humidity Requirements

    DES-7200 Hardware Installation Guide 2.2.3 Temperature and Humidity Requirements To ensure the normal working and a prolonged useful life of the DES-7210/7206, appropriate temperature and humidity must be maintained in the equipment room. If the equipment room has temperature and humidity that do not meet the requirements for a long time, the equipment may be damaged.
  • Page 44: Power Requirements

    DES-7200 Hardware Installation Guide Apart from dust, the salt, acid and sulfide in the air in the equipment room must also meet strict r equirements, as s uch poi sonous s ubstances may accelerate t he c orrosion of t he metal and t he aging of s ome p arts.
  • Page 45: Emc Ground

    DES-7200 Hardware Installation Guide 2.3.3 EMC Ground The gr ound r equired f or E MC des ign i ncludes s hielding gr ound, f ilter gr ound, noise a nd interference suppression, and level reference. All the above constitute the comprehensive grounding r equirements.
  • Page 46: Precaution For Fiber Connection

    DES-7200 Hardware Installation Guide Keep the equipment away from high-power radio transmitter, radar transmitting station, and high-frequency large-current device. Measures must be taken to isolate static electricity. 2.3.5 Precaution for Fiber Connection Before you connect the fibers, verify that the optical connector type and fiber type match the optical interface type used, and pay attention to the Tx and Rx directions of the fiber.
  • Page 47: Product Installation

    DES-7200 Hardware Installation Guide Product Installation Before you install the DES-7210/7206, make sure you have carefully read Chapter 2 and this chapter. Make sure that the requirements set forth in Chapter 2 have been Note met.
  • Page 48: Installation Flow

    DES-7200 Hardware Installation Guide Installation Flow Assembly of the DES-7210/7206 before installation Install the cabinet Mount the DES-7210/7206 into the Connect the system ground Connect the power supply (AC or DC) Insert various modules Connect external port cables or fibers of...
  • Page 49: Installation Verification

    DES-7200 Hardware Installation Guide Installation Verification The DES-7210/7206 is a kind of c omplicated eq uipment, s o you m ust c arefully plan a nd arrange its i nstallation location, ne tworking m ode, po wer s upply, and wiring b efore installation.
  • Page 50: Mounting The Des-7210/7206 Into The Cabinet

    DES-7200 Hardware Installation Guide Install the tray and wiring layer on the rack according to the configuration of one rack with one cabinet and one rack with multiple cabinets. Mounting the DES-7210/7206 into the Cabinet 3.4.1 Precautions Before the DES-7210/7206 is mounted into the cabinet, first verify that the front and back brackets of the cabinet are at the right locations.
  • Page 51: Installing The Power Supply

    DES-7200 Hardware Installation Guide Figure 3-1 Installing the Fan Tray of the DES-7210 Figure 3-2 Installing the Fan Tray of the DES-7206 Installing the Power Supply The DES-7210/7206 system provides AC and DC power, which can be installed in the same...
  • Page 52 DES-7200 Hardware Installation Guide Figure 3-3 Schematic Diagram for Installing the Power Supply of the DES-7210 Figure 3-4 Schematic Diagram for Installing the Power Supply of the DES-7206...
  • Page 53 DES-7200 Hardware Installation Guide Insert the power supply module into the cabinet along the guide rail, as shown in Figure 3-6 and Figure 3-7: Figure 3-5 Schematic Diagram for Installing the Power Supply of the DES-7210 Figure 3-6 Schematic Diagram for Installing the Power Supply of the DES-7206...
  • Page 54 DES-7200 Hardware Installation Guide Tighten the screws on both sides of the power supply by using a straight screwdriver, as shown in Figure 3-8 and Figure 3-9. Figure 3-7 Schematic Diagram for Installing the Power Supply of the DES-7210 Figure 3-8 Schematic Diagram for Installing the Power Supply of the DES-7206...
  • Page 55: Installing The Handle

    DES-7200 Hardware Installation Guide Installing the Handle For eas y handling of t he s ystem, t he DES-7210/7206 chassis i s pr ovided w ith a handle, which can be installed by performing the following steps: Align the handle with the sunk hole on the fastening bar;...
  • Page 56: Installing The Cabling Rack Of The Des-7210

    DES-7200 Hardware Installation Guide Installing the Cabling Rack of the DES-7210 The cabling rack of the DES-7210 can be performed by performing the following steps: Remove the blank panel of the tracing rack by loosing the captive screws with a straight screwdriver and the cross screws with a cross screwdriver, as shown in Figure 3-12.
  • Page 57 DES-7200 Hardware Installation Guide Figure 3-12 Installing the Cabling Rack of the DES-7210 Fasten t he c abling r ack b y using t he c ross M 3 s crews pr ovided, as s hown in Figure 3-14. ( The c abling r ack i s av ailable in t wo s izes, a nd you c an s elect t he appropriate...
  • Page 58: Installing The Air Filter Of The Des-7210

    DES-7200 Hardware Installation Guide Installing the Air Filter of the DES-7210 Simply push the air filter of the DES-7210 into the cabinet along the guide rail, as shown in Figure 3-15. Figure 3-14 Installing the Air Filter of the DES-7210 You are recommended to install the air filter as the last step of the chassis installation.
  • Page 59: Precautions

    DES-7200 Hardware Installation Guide Figure 3-15 Connection of grounding posts on the DES-7210/7206 back 3.10.2 Precautions The s ectional area of t he gr ounding c able s hould be det ermined ac cording t o t he  possible maximum current. Cables of good conductor should be used.
  • Page 60: Simple Connection Steps

    DES-7200 Hardware Installation Guide Figure 3-16 Schematic Diagram for the Connection of the DC Power Cable 3.11.2 Precautions Before c onnecting t he p ower s upply, you m ust v erify that the external p ower s upply ...
  • Page 61: Connecting The Cable Of The Management Module

    DES-7200 Hardware Installation Guide Figure 3-17 Schematic Diagram for the Connection of the AC Power Cable 3.12.2 Precautions Before c onnecting t he p ower s upply, you m ust v erify t hat the external p ower s upply ...
  • Page 62: Removing Boards From The Des-7210/7206

    DES-7200 Hardware Installation Guide 3.14 Removing Boards from the DES-7210/7206 3.14.1 Steps for Removing Boards Unplug all cables/fibers such as optical fibers and RJ45 twisted pairs from the panel. Tighten two captive screws on the panel. Draw out the board by holding the ejector with both hands, as shown in Figure 3-18 and Figure 3-20.
  • Page 63: Installing Boards On The Des-7210/7206

    DES-7200 Hardware Installation Guide Figure 3-19 Schematic Diagram for the Components of the DES-7206 3.15 Installing Boards on the DES-7210/7206 3.15.1 Simple Steps of Board Installation Remove the appropriate component card or blank panel according to 3.14. Replace it with the appropriate card and insert into the guide rail.
  • Page 64: 3.17 Binding The Cables

    Bind the drooping part of the optical fibers and twisted pairs of each board, and lead them to both sides of the chassis according to the convenience. For the DES-7200, you can l ead out t he o ptical f ibers and t wisted p airs b y using t he c abling c hute o n t he chassis.
  • Page 65: Des-7210/7206 Maintenance

     Working status of the fan and power supply  Temperature status of the system  For t he m onitoring c ommands, s ee t he DES-7200 Configuration Guide of t he DES-7210/7206. DES-7210/7206 Hardware Maintenance 4.2.1 Board Maintenance When you need to replace a board in the case of a fault, perform replacement according to the instructions provided in Section 3.9.
  • Page 66: Power Supply Maintenance

    DES-7200 Hardware Installation Guide During the process, you should clean the air filter of the DES-7210/7206. Note 4.2.3 Power Supply Maintenance When the power supply fails, you only need to disconnect the power cable, loosen the two panel screws on the power module, unplug the power module, replace it with a good one, and tighten the panel screws, and then connect the power cables.
  • Page 67: Troubleshooting

    DES-7200 Hardware Installation Guide Troubleshooting General Flow for Troubleshooting Installation Faults Abnormal working after installation installation Check the cabinet Check t he m ounting o f t he DES-7210/7206 in the cabinet connection Check the power Check the installation of the power...
  • Page 68 The s ystem l ogin password of t he s witch is f orgotten or l ost, a nd s o it i s no t possible t o configure the data. [Troubleshooting] Please contact D-Link Customer Service Department for technical support. Fault 2: The AC power module does not work. [Fault Description] The Status L ED of eac h line c ard i s OFF, t he Power LED of the fan tray is OFF (only f or DES-7210), and the fan does not work.
  • Page 69 DES-7200 Configuration Guide. If not, modify the serial port configuration parameters. If there is still no serial p ort pr inted information, pl ease c ontact D-Link Customer S ervice D epartment f or technical support.
  • Page 70 DES-7200 Hardware Installation Guide The serial port console outputs illegible characters. [Troubleshooting] Such problem i s r elated to t he s ettings of t he s erial p ort. C heck i f t he s ettings of s uch...
  • Page 71 DES-7200 Hardware Installation Guide Appendix Connectors and Connection Media 1000BASE-T/100BASE-TX/10BA SE-T Port The 1000BASE-T/100BASE-TX/10BASE-T is a port that supports adaptation of three rates, and automatic MDI/MDIX Crossover at these three rates. The 1000BASE-T complies with IEEE 802.3ab, and us es t he c able of 100-ohm C ategory-5 or Supper C ategory-5 U TP or STP, which c an b e up to 10 0 m .
  • Page 72 Appendix DES-7200 Hardware Installation Guide Figure A-3 Connections of the Twisted Pairs of the 100BASE-TX/10BASE-T Optical Fiber Connection For the optical fiber ports, select single-mode or multiple-mode optical fibers for connection according t o t he f iber m odule c onnected. T he c onnection s chematic di agram i s s hown i n...
  • Page 73 DES-7200 Hardware Installation Guide Appendix Mini-GBIC and 10G XENPAK Modules We pr ovide the ap propriate 10 00M S FP m odule ( Mini-GBIC m odule) a nd 10G X ENPAK module for the types of interfaces of the switch modules. You can select the SFP or XENPAK module to suit your specific needs.
  • Page 74 Models and Technical Specifications of the 10G XENPAK Module Table B-2 Models and Technical Specifications of the 10G XENPAK Module Optical Core Modular Reception XENPAK Wavelength Transmission Standard Intensity Media Type Size Bandwidth sensitivity Model (nm) Distance Compliance (nm) (MHz/km) (MAX) (MAX) 62.5...
  • Page 75 DES-7200 Hardware Installation Guide Appendix Optical Core Modular Reception XENPAK Wavelength Transmission Standard Intensity Media Type Size Bandwidth sensitivity Model (nm) Distance Compliance (nm) (MHz/km) (MAX) (MAX) Single-mode optical fiber 10GBASE- 1310 Max. 10KM; 0.5dBm -12.6dBm connector) Single-mode optical fiber...
  • Page 76 The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
  • Page 77 D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2004 by D-Link Corporation/D-Link Systems, Inc.
  • Page 78: Product Registration

    Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
  • Page 79: Tech Support

    You can find software updates and user documentation on the D- Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product.
  • Page 80: Technical Support

    Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://www.dlink.co.uk...
  • Page 81: Assistance Technique

    0.12 € TTC/min depuis un poste fixe Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min De Lunes a Viernes de 9:00 a 19:00 http://www.dlink.es...
  • Page 82: Pomoc Techniczna

    Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://www.dlink.eu/support/ Technická podpora Web: http://www.dlink.cz/support/ E-mail: support@dlink.cz Telefon: 225 281 553 Telefonická podpora je v provozu: PO- PÁ od 08.00 do 17.00 Pevná...
  • Page 83 Teknistä tukea asiakkaille Suomessa: Arkisin klo. 9 - 21 numerosta : 06001 5557 Internetin kautta : http://www.dlink.fi Teknisk Support D-Link Teknisk Support via telefon: 0900-100 77 00 Vardagar 08.00-20.00 D-Link Teknisk Support via Internet: http://www.dlink.se Assistência Técnica Assistência Técnica da D-Link na Internet: http://www.dlink.pt...
  • Page 84 D-Link - ovo spletno stran www.dlink.eu www.dlink.biz/sl Suport tehnic Vă mulţumim pentru alegerea produselor D-Link. Pentru mai multe informaţii, suport şi manuale ale produselor vă rugăm să vizitaţi site-ul D-Link www.dlink.eu www.dlink.ro...
  • Page 85 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7 Technical Support Web: http://www.dlink.com.au E-mail: support@dlink.com.au India: Tel: 1800-233-0000 (MTNL & BSNL Toll Free) +91-832-2885700 (GSM, CDMA & Others) Web: www.dlink.co.in...
  • Page 86 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Egypt: Tel: +202-2919035, +202-2919047 Sunday to Thursday 9:00am to 5:00pm Web: http://support.dlink-me.com E-mail: support.eg@dlink-me.com Iran: Tel: +98-21-88880918,19 Saturday to Thursday 9:00am to 5:00pm Web: http://support.dlink-me.com...
  • Page 87 Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: +7(495) 744-00-99 Техническая поддержка через Интернет...
  • Page 88 SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.com SOPORTE TÉCNICO PARA USUARIOS EN LATINO AMERICA Soporte técnico a través de los siguientes teléfonos de D-Link PAIS NUMERO HORARIO...
  • Page 89 Você pode encontrar atualizações de software e documentação de usuário no site da D-Link Brasil. A D-Link fornece suporte técnico gratuito para clientes no Brasil durante o período de vigência da garantia deste produto. Suporte Técnico para clientes no Brasil: Website para suporte: www.dlink.com.br/suporte...
  • Page 90 D-Link D-Link...
  • Page 91 Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.id...
  • Page 92 Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただくと、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.com...
  • Page 93 技术支持 办公地址:北京市东城区北三环东路 36 号 环球贸易中心 B 座 26F 02-05 室 邮编: 100013 技术支持中心电话:8008296688/ (028)66052968 技术支持中心传真:(028)85176948 各地维修中心地址请登陆官方网站查询 网址:http://www.dlink.com.cn 办公时间:周一到周五,早09:00到晚18:00...
  • Page 94: Registration Card

    8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...

Table of Contents