Show Ip Pim Sparse-Mode Interface; Show Ip Pim Sparse-Mode Local-Members - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Examples
40.2.3

show ip pim sparse-mode interface

show ip pim sparse-mode interface [interface-type interface-number [detail] ]
Parameter
description
Command
mode
Usage
guideline
Examples
40.2.4

show ip pim sparse-mode local-members

show ip pim sparse-mode local-member [interface-type interface-number]
DES-7210# show ip pim sparse-mode bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (BSR)
BSR address: 192.168.127.1
Uptime: 01d23h14m, BSR Priority: 64, Hash mask length: 10
Next bootstrap message in 00:00:42
Role: Candidate BSR
State: Elected BSR
Candidate RP: 30.30.100.200(GigabitEthernet 0/3)
Advertisement interval 60 seconds
Next Cand_RP_advertisement in 00:00:32
Parameter
interface-type
interface-number
detail
Privileged EXEC mode, global configuration mode and interface
configuration mode
This command shows the PIM-SM information on the interface.
DES-7210 #show ip pim sparse-mode interface detail
GigabitEthernet 0/3 (vif 2):
Address 30.30.100.200, DR 30.30.100.200
Hello period 30 seconds, Next Hello in 13 seconds
Triggered Hello period 5 seconds
Neighbors:
30.30.100.1
Chapter 40 PIM-SM Configuraiton Commands
Priority: 64, Hash mask length: 10
Description
(Optional) Interface name. This
command takes effect for all
commands by default.
(Optional) Show the details of an
interface.
40-19