Clear Ip Bgp Vrf - D-Link DES-7200 Cli Reference Manual

Chapter 33 BGP4 Configuration Commands
Command
mode
Usage
guidelines
Examples
Related
commands

33.1.33 clear ip bgp vrf

Use this command to reset the BGP sessions of all the members of the VRF.
clear ip bgp vrf vrf-name [* address }[soft [in | out]]
Parameter
description
Default
configuration
33-30
Privileged EXEC mode.
This command resets the BGP session with all members in the peer
group.
DES-7210# clear ip bgp peer-group my-group in
Command Description
Reset the BGP session.
clear ip bgp
show ip bgp Show the BGP route entry.
Parameter Description
vrf-name VRF name
* Reset all the current BGP sessions.
Reset the BGP session of the peer of the IPv4
ipv4 unicast
unicast address family.
address Reset the BGP session with the specified peer.
Without soft, reset the direct session with the
in
specific peer.
Without soft, reset the direct session with the
out
BGP speaker.
Perform soft resetting for all routing information
soft
received/sent from/to the specified peer.
Perform soft resetting for the received routing
soft in
information.
Perform soft resetting for the distributed routing
soft out
information.
N/A.
DES-7200 CLI Reference Guide