Vrrp Timers Learn - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
57.1.8

vrrp timers learn

Use this command to enable the timer learning function. The no format of it disables the
function.
vrrp group timers learn
no vrrp group timers learn
Parameter
description
Default
configuration
Command
mode
By default, the VRRP function is not enabled on the
the VRRP function is enabled, the default advertisement interval of
the master device is 1 second.
Interface configuration mode.
If the current device becomes the master device in the VRRP group,
it will notify its VRRP status, priority and other information by sending
the VRRP advertisement in the set interval.
The example below sets the VRRP advertisement interval as 4
seconds.
vrrp 1 timers advertise 4
Command
DES-7210(config-if)#
vrrp group ip ipaddress
[ secondary ]
DES-7210(config-if)#
vrrp group timers learn
Parameter
group
By default, the VRRP function is not enabled on the
the VRRP function is enabled, the timer learning function is disabled
by default.
Interface configuration mode.
Chapter 57 VRRP Configuration Commands
Description
Enable the VRRP function and
set the IP address for the
virtual device.
Enable the timer learning
function.
Description
VRRP group number
interface. Once
interface. Even if
57-27