Clear Ip Bgp Peer-Group - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Usage
guidelines
Examples
Related
commands

33.1.32 clear ip bgp peer-group

Use this command to reset the session with all members in the peer group.
clear ip bgp peer-group peer-group-name [ipv4 unicast] [[soft] [in | out]]
Parameter
description
Default
configuration
This command can be used only to clear the statistics of
unsuppressed routes. It does not de-suppress the suppressed routes.
If you hope to clear all route statistics and de-suppress the
suppressed routes, run the clear ip bgp dampening command.
DES-7210# clear ip bgp flap-statistics
Command Description
Enable the route dampening function and set the
bgp dampening
dampening parameters.
show ip bgp Show the BGP route entry.
Parameter Description
peer-group-name Name of the peer group.
ipv4 unicast ipv4 unicast session
Without soft, reset the session through
which the peer establishes active
in
connection.
Without soft, reset the session through
out which the local BGP speaker
establishes active connection.
Perform soft resetting for all routing
soft information received/sent from/to the
specified peer
Perform soft resetting for the received
soft in
routing information.
Perform
soft out
distributed routing information.
N/A.
Chapter 33 BGP4 Configuration Commands
soft resetting for the
33-29