Dot1X Client-Probe Enable - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Default
Command
mode
Usage
guidelines
Examples
Related
commands
44.4.2

dot1x client-probe enable

Use this command to enable the online probe function of the client
[no] dot1x client-probe enable
Parameter
description
Default
Command
mode
Alive interval
alive
interval Timer value
The default Hello interval is 20 seconds.
Default user alive interval is 250 seconds
Global configuration mode.
Configure the alive detection timer for the client. You can use the
show dot1x command to show the 802.1x setting.
The following example sets the Hello interval to 30 seconds and the
alive interval to 120 seconds:
DES-7210# configure terminal
DES-7210(config)# dot1x probe-timer interval 30
DES-7210(config)# dot1x probe-timer alive 120
DES-7210(config)# end
DES-7210# show dot1x probe-timer
Hello Interval: 30 Seconds
Hello Alive: 120 Seconds
Command Description
Show dot1x
Show the probe timer information.
probe-timer
N/A.
Disabled.
Global configuration mode.
Chapter 44 802.1X Configuration Commands
44-13