D-Link DES-7200 Cli Reference Manual page 1067

DES-7200 CLI Reference Guide
Related
commands
Use this command to configure the corresponding queue on the condition that the queue
uses wrf schedule algorithm.
wrf-queue queue-id bandwidth min max
no wrf-queue queue-id bandwidth
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Command Description
show mls qos Show the DSCP-COS, COS-DSCP and
maps IP-prec-DSCP maps.
56.2.14 wrr-queue bandwidth
Parameter Description
queue-id Queue ID.
min The minimum bandwidth..
max The maximum bandwidth.
Min: the minimum interface bandwidth, in kbps;
Max; the maximum interface bandwidth, in kbps
Interface configuration mode.
Use this command to configure the minimum and maximum interface
bandwidth on the condition that the queue uses wrf schedule
algorithm.
The following example sets the queue to use wrf schedule algorithm:
DES-7210(config)# mls qos scheduler wrf
DES-7210(config)# show mls qos scheduler
The following example configures the minimum and maximum
bandwidth:
DES-7210(config-if)# wrf-queue 2 bandwidth 10 10240
DES-7210(config-if)# wrf-queue 4 bandwidth 7 10240
DES-7210(config-if)# show running
Command Description
Show QOS schedule method.
show mls qos
Chapter 56 QoS Configuration Command
56-13