Poe Management Configuration Commands; Configurtion Related Command; Poe Enable; Poe-Power Lower Lower - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
70

70.1 Configurtion Related Command

POE configuration management includes the following related commands:




70.1.1

poe enable

Use this command to enable the POE(Power-over-Ethernet) function on the interface. Use
the no form of this command to disable this function.
poe enable
no poe enable
Command
mode
Examples
70.1.2

poe-power lower lower

Use this command to the minimum allowed voltage. Use the no form of this command to
restore to the default value.
poe-power lower lower
no poe-power lower
POE Management
Configuration
Commands
poe enable
poe-power lower lower
poe-power upeer upeer
poe disconnect-mode mode
Interface configuration mode.
DES-7210(config-if)# poe enable
DES-7210(config-if)# no poe enable
Chapter 70 POE Management Configuration Commands
70-3