Logging Source Interface - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Usage
guidelines
Examples
Related
commands
66.1.9

logging source interface

Use this command to configure the source interface of logs. The no format of the command
restores it to the default value.
logging source interface interface-type interface-number
no logging source interface
Parameter
description
Default
configuration
Command
mode
To send logs to the Syslog Server, execute first the global
configuration command logging to configure the Syslog Server.
Then, execute logging trap to specify the severity of logs to be sent.
The show logging command displays the related setting parameters
and statistics of the log.
The example below enables logs at severity 6 to be sent to the Syslog
Server at address 202.101.11.22:
DES-7210(config)# logging 202.101.11.22
DES-7210(config)# logging trap informational
Command
logging on
logging
show logging
Parameter
interface-type
interface-number
N/A.
Global configuration mode.
Chapter 66 Syslog Configuration Commands
Description
Reocrd logs on different devicds.
Record logs to the Syslog server.
Show the logs and related log configuration
parameters in the buffer.
Description
The type of interface
The number of interface
66-9