D-Link DES-7200 Cli Reference Manual page 470

Chapter 32 OSPFv2 Configuration Commands
32-70
OSPF neighbor connection state.
means the stable state; DR indicates that
the neighbor is the designated device; BDR
indicates that the neighbor is the backup
State
designated device; DROTHER indicates
that the neighbor is not a DR/BDR.
Point-to-point network type has no DR or
DBR.
State changes
Times of state changes
times
Dead Time Dead time of the neighbor
Interface address of the DR elected of the
DR neighbor device (that is, the DR field of the
Hello packet)
Interface address of the BDR elected of the
BDR neighbor device (that is, the BDR field of the
Hello packet)
Hello packet E-bit option, where 0 indicates
Options that the area is a STUB area; 2 indicates
that the area is not a STUB area.
Dead timer due in Dead time of the neighbor device
Period from when the device is discovered
Neighbor up time
till now
Database
Statistics on the neighbor DD packets
Summary List
Link State Statistics on the neighbor LS request
Request List packets
Link State
Statistics
Retransmission
packets
List
Crypt Sequence
Area MD5 authentication code
Number
Thread Inactivity
Status of invalid neighbor timer
Timer
Thread Database
Description Status of DD packet timer of the interface
Retransmission
Thread Link State
Status of LS request packet timer of the
Request
interface
Retransmission
DES-7200 CLI Reference Guide
on the neighbor re-transmit
FULL