Match As-Path - D-Link DES-7200 Cli Reference Manual

Chapter 34 Protocol-independent Configuration Commands

34.1.14 match as-path

Use this command to redistribute the routes of AS_PATH attribute permitted by the access
list in the route map configuration mode. Use the no form of this command to remove the
setting.
match as-path as-path-acl-list-num [ as-path-acl-list-num......]
no match as-path as-path-acl-list-num [ as-path-acl-list-num......]
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
34-16
Parameter
as-path-acl-list-num
access-list-name
None.
Route map configuration mode.
The match as-path can be followed by an access list number or
name.
One or more match or set commands can be executed to configure
one route map. If the match command is not used, all the routes will
be matched. If the set command is not used, no operation will be
performed.
!
route-map ROUTEMAP2IBGP
match as-path 20 30
Command Description
match
Match the community.
community
match metric Match the metric.
match origin Match the source of routes.
set as-path Set the AS_PATH attribute of redistributed
prepend routes
Set the metric.
set metric
Set the metric type.
set metric-type
DES-7200 CLI Reference Guide
Description
ACL number, in the range of 1 to
500.
Name of the access list