Show Ipv6 Traffic-Filter - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
commands
Platform
description
54.2.5

show ipv6 traffic-filter

Use this command to show the configured IPv6 ACL of the interface.
show ipv6 traffic-filter[interface <interface>]
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
54.2.6 show access-group
Use this command to show the ACL configuration of the interface.
show access-group[interface <interface>]
Parameter
description
Define the extended MAC ACL.
mac access-list
The software version must be R10.0 and higher.
Parameter
<interface>
Privileged mode.
Show the IPv6 ACL associated with the interface. If no interface is
specified, the associated IPv6 ACLs of all the interfaces will be
shown.
DES-7210# show ipv6 traffic-filter interface gigabitethernet 0/4
ipv6 access-group v6 in
Applied On interface GigabitEthernet 0/4.
Command Description
ipv6 access-list Define the type of IPv6 ACL.
The software version must be R10.0 and higher.
Parameter
<interface>
Chapter 54 ACL Configuration Commands
Description
Interface ID
Description
Interface ID
54-37