Show Ipv6 Ospf Topology - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Command
mode
Examples
Related
commands
37.2.6

show ipv6 ospf topology

Use this command to show the topology of each area of OSPFv3.
show ipv6 ospf [process- id] topology [area area-id]
Parameter
description
Command
mode
Privileged mode.
The following example shows the information about OSPF routes.
DES-7210# show ipv6 ospf route
OSPFv3 Process (1)
Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area,
E1 - OSPF external type 1, E2 - OSPF external type 2
Destination
Next-hop
E2 2222::/64
via fe80::c800:eff:fe84:1c, FastEthernet 1/0
O 3333::/64
via fe80::c800:eff:fe84:1c, FastEthernet 1/0, Area 0.0.0.0
Command Description
ipv6 router ospf Start the OSPFv3 routing process.
Parameter Description
process- id OSPFv3 process number, 1-65535
area-id Area ID
Privileged mode.
Chapter 37 OSPFv3 Configuration Commands
Metric
1/20
11
37-31