D-Link DES-7200 Cli Reference Manual page 1013

DES-7200 CLI Reference Guide
access-list id {deny | permit} protocol [VID [out][inner in]] {source
source-wildcard | host source | any} {host source-mac-address | any }
{destination destination-wildcard | host destination | any} {host
destination-mac-address | any} [precedence precedence] [tos tos]
[fragments] [time-range time-range-name]
Extended expert ACLs of some important protocols:
Internet Control Message Protocol (ICMP)
access-list id {deny | permit} icmp [VID [out][inner in]] {source source-wildcard | host
source | any} {host source-mac-address | any } {destination destination-wildcard |
host destination | any} {host
destination-mac-address | any} [ icmp-type ] [ [ icmp-type [icmp-code ] ]
| [ icmp-message ] ] [precedence precedence] [tos tos] [fragments]
[time-range time-range-name]
Transmission Control Protocol (TCP)
access-list id {deny | permit} tcp [VID [out][inner in]]{source source-wildcard | host
Source | any} {host source-mac-address | any } [operator port [port] ] {destination
destination-wildcard | host destination | any} {host destination-mac-address | any}
[operator port [port] ] [precedence precedence] [tos tos] [fragments] [time-range
time-range-name] [match-all tcp-flag]
User Datagram Protocol (UDP)
access-list id {deny | permit} udp[VID [out][inner in]] {source source –wildcard | host
source | any} {host source-mac-address | any } [ operator port [port] ] {destination
destination-wildcard | host destination | any}{host destination-mac-address | any}
[operator port [port] ] [precedence precedence] [tos tos] [fragments] [time-range
time-range-name]
5. List remark
access-list list-remark text
The following parameters are described in the sequence they appear. Once described, a
parameter will not be described anymore.
Parameter
description
Parameter
id
Chapter 54 ACL Configuration Commands
Description
Access list ID. The ranges available
are 1 to 99, 100 to 199, 1300 to 1999, 2000
to 2699, 2700 to 2899, and 700 to 799.
54-5