Chapter 48 SSH Configuration Commands
show ssh
show crypto key mypubkey
disconnect ssh
48.2.1
show ip ssh
Use this command to show the information of the SSH Server.
show ip ssh
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Version
description
48-6
N/A.
N/A.
Privileged EXEC mode.
This command is used to show the information of the SSH Server,
including version, enablement state, authentication timeout, and
authentication retry times.
Note: If no key is generated for the SSH Server, the SSH version is
still unavailable even if this SSH version has been configured.
DES-7210# show ip ssh
Command
ip ssh version {1 | 2}
ip ssh time-out time
ip ssh
authentication-retries
retry times
The software version must be R10.1 and higher.
DES-7200 CLI Reference Guide
Description
Configure the version for the SSH Server.
Set the authentication timeout for the SSH
Server.
Set the authentication retry times for the
SSH Server.