Label-Merge - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
42.1.3

label-merge

Use this command to enable global label merge. Use the no form of this command to
disable this function.
[no] label-merge
interval
seconds
By default, the holdtime of the hello message for the extended
mechanism is 45s, and the interval of the hello message is 5s, which
is 1/9 of the holdtime.
config-mpls-router mode
For the actual configuration, it is necessary to ensure the holdtime of
the target hello is larger than the interval value. Otherwise, LDP can
not work normally according to the requirement. Note that this
command is valid for the targeted hello used by the extended
discovery mechanism only.
DES-7210(config)# mpls route ldp
DES-7210(config-mpls-router)# discovery target-hello holdtime 90
Command
show mpls ldp
parameters
Chapter 42 MPLS Configuration Commands
The interval of the hello message for the
extended mechanism.
Range within 1-65535
Description
Show the LDP global configuration attribute
42-3